Shop
Showing 181–189 of 622 resultsSorted by popularity
-
LeafspringsSplit Mono Leafsprings/pair -1″ Drop (660-33)
1970-1977 Ford Maverick
-1″ DROP HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair Stock Height (770-35)
1983-2011 Ford Ranger
STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair Stock Height (650-36)
1962-1965 Ford Fairlane
STOCK HEIGHT SPLIT MONO LEAFSPRINGS, PER PAIR
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 23.5″ (L210-235-270)
SET OF TWO
1.25″ diameter x 23.5″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
CalTracs - Standard
CalTracs Standard (6220)
THIS KIT INCLUDES 2-HOLE PIVOT PLATES.
Built for:
1963-1964 Ford Galaxie
NOTE: Hanger modification required. See graphic for basic instructions. Photos of actual install/modification, click HERE. Call 661-728-9600 during regular business hours if you have questions.
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CR Series 9 Way Adjustable SHocks
CR Series Rear Shocks/pair (CR42150)
1955-1957 Chevrolet BelAir
NOTE: Please note on your order if you have a transbrake, footbrake, or manual transmission/stick shift.
Collapsed Length: 15.5″, Extended Length: 24″, Approx. Ride Height: 17.5″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Calvert Racing’s CR Series 9-Way Adjustable Rear Shocks twin tube design has what you need for all around best performance and maximum consistency. The dampeners allow you to control rear body separation through an external dial to keep the tires planted.
Constructed of steel with heavy duty 5/8 shaft ensures durability in the most stressful conditions, the 9-Way Adjustable dial is located outside the body for easy access to adjust rebound and to control rear body separation. Great for street/strip use.(0 reviews) -
CF Series 90/10 Race Shocks
CF Series Front Racing Shocks/pair (CF35093-1)
1964-1973 Ford Mustang
Collapsed Length: 8.93″, Extended Length: 13.89″ *
* Approximate lengths. Please note that Racing Shocks require different collapsed/extended lengths than stock/street shocks.
Designed with dual compression valving, Calvert’s CF Series 90/10 Drag Shocks were engineered for cars with mid-range power for softest rate of rebound on the market to allow for better weight transfer and more weight over your rear tires.
Built-in high-speed valving keeps your front end from bottoming out on hard landings. Once you’re out of the hole, low speed compression is active, and a softer valving allows the front end to settle at the top end. Every application has been evaluated for best length, assuring that each vehicle has sufficient travel for maximum traction unlike other manufacturers who model their shocks after factory length shocks. No adjustments are required; designed to perform right out of the box. Lightweight, industrial design.
(0 reviews) -
Lifestyle
2XL Long Sleeve Black T-Shirt (LST-2XB)
NEW! 2X LARGE LONG SLEEVE BLACK T-SHIRT
100% Ultra Cotton for Ultra Comfort! Knit cuffs, silk screened front and back. Machine washable, cold water with like colors.
Available in limited quantities in L, XL, 2XL, 3XL only.
(LST-LB shown)
(0 reviews) -
Lifestyle
M Navy T-Shirt (T-MN)
MEDIUM NAVY T-SHIRT
50/50 Cotton/Poly blend for comfort and ease of wear. Silk screened front and back. Machine washable.
(T-LN shown)
(0 reviews)
