Shop
Showing 388–396 of 622 resultsSorted by popularity
-
CalTracs - TrucksCalTracs Truck (7200)
2004-2008 Ford F-150
Designed especially for trucks, axle BELOW springs. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, eliminates spring wrap up, improves 60′ times. Black powder coated. Berlin-style pivot plates for most applications.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your truck hooking harder than ever whether you’re drag racing, sled pulling or just towing. Helps eliminate wheel hop. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. HD Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
FULL COLOR INSTALLATION GUIDE INCLUDED.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware.
THIS SET REQUIRES AND INCLUDES SQUARE U-BOLTS.
SQUARE U-BOLTS (spring OVER axle): Calvert Racing’s square u-bolts are 9/16″ ” diameter. We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FAQ page or CalTracs Installation Guide for more info.
(0 reviews) -
CalTracs - Trucks
CalTracs Truck (3110)
1967-1972 Chevrolet C20
1967-1972 GMC C20
Designed especially for trucks, axle BELOW springs. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, eliminates spring wrap up, improves 60′ times. Black powder coated. Berlin-style pivot plates for most applications.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your truck hooking harder than ever whether you’re drag racing, sled pulling or just towing. Helps eliminate wheel hop. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. HD Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
This kit requires and INCLUDES a set of square u-bolts.
SQUARE U-BOLTS (spring OVER axle): Calvert Racing’s square u-bolts are 9/16″ ” diameter. We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FAQ page or CalTracs Installation Guide for more info.
REQUIRES CUSTOMER MODIFICATION TO EXISTING HANGER.
FULL COLOR INSTALLATION GUIDE INCLUDED.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 15.5″ (L130-155-190)
SET OF TWO
1.25″ diameter x 15.5″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews) -
CalTracs - Standard
CalTracs Standard (6700)
THIS KIT INCLUDES 2-HOLE PIVOT PLATES.
Built for:
1971-1980 Ford Pinto
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
Accessories
U-Bolts, Round/set, 3.5″x9.5″ (DUR350x950)
CLEARANCE: SET OF FOUR ROUND U-BOLTS w/hardware
Fits 3.5″ axle ( 3.5″ inside diameter x 9.5″ long,)
Round U-bolts, RAW Grade 5 steel, 1/2″ diameter. Sets include 4 U-bolts, with nuts and washers.
Limited quantities available, subject to prior sale. ALL SALES FINAL on Clearance/Discontinued items. No returns, no exchanges.
(0 reviews) -
Lifestyle
KEY TAGS and Stylus Pen
NEW! TWO Embroidered/Woven Key tags and Stylus Pen
Two royal blue Embroidered “Remove Before Flight’-Style Key Tags with Calvert Racing logo woven on both sides (5.5 inches long, tag only), medium duty jump ring 1” diameter. Also included, Stylus style pen with logo, black ink.
(0 reviews) -
Accessories
SPRING SLIDERS for C1500 Factory Multi Springs (SL-30015)
SET OF TWO SPRING SLIDERS
1988-2016 C1500 trucks with FACTORY Multi Leafsprings. Outside diameter aluminum bushings: 1.680″
FABRICATION REQUIRED TO MOUNT TO FRAME. Call 661-728-9600 if you have questions.
NOTE: If you have Calvert Springs, please use Part Number SL-300CR
Heavy Duty roller bearings keep the leafspring and body from binding up during suspension movement. Replaces the existing shackles.
SL-300CR shown.
(0 reviews) -
Accessories
SHACKLE BUSHINGS/kit MOPAR (M20694)
UPPER FRAME RAIL POLY BUSHING KIT (REPLACEMENT)
Fits most MOPAR vehicles. 1″ Outer Diameter, 1/2″ Inner Diameter
Polyurethane shackle bushings ensure your vehicle is free of chassis bind and provides a longer service life in comparison to rubber bushings. This kit does NOT include rear spring eye bushings.
M20697 SHOWN.
(0 reviews) -
CalTracs - Standard
CalTracs Standard (6520)
THIS KIT INCLUDES 2-HOLE PIVOT PLATES.
REQUIRES HANGERS. See Parts & Accessories
Built for:
1966-1967 Ford Fairlane
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews)
