Shop
Showing 379–387 of 607 resultsSorted by popularity
-
AccessoriesSPRING SHACKLES/set (SHU-300x500A)
Calvert Racing Universal Shackle and Bushing set for vehicles with 1″ Bushing/with Calvert Racing Split Mono Leafsprings
1962 – 1965 Ford Fairlane
This kit includes 1 pair of shackles and a total of 8 polyurethane bushings, 4 for the rear of the spring and 4 for the upper frame above the shackle. These shackles feature a 9/16″ shouldered bolt that necks down to a 3/8″ thread, with the required nuts included.
(0 reviews) -
Accessories
TIE DOWN BRACKETS/PAIR (TD-190TM)
TIE DOWN BRACKETS FOR Series 2500-3500 TRUCKS – SET OF TWO (90 degree angle)
3/8″ Zinc-Plated Steel, 90 degree angle. Overall size: 6-1/4″ wide” x 3″ tall; Hole is 1-3/8″ diameter. Manufactured in USA by Calvert Racing.
DESIGNED TO FIT CALTRACS REAR MOUNTS:
MT-2501 (3.25″ Axle Truck)
MT-2502 (3.5″ Axle Truck)
MT-2503 (3.5″ Axle Truck with 3″ wide springs)
MT-2504 (Ram 2500/3500: 4″ Axle, 3″ spring)
One of the little annoyances many racers have is finding a place on their race car to tie it down onto a trailer or hauler without damaging the car and having to crawl under to find a spot for a strap/hook to load/unload/load again after a long day racing….
IF YOU HAVE CALTRACS, YOU HAVE TIE DOWN POINTS!
Secure your vehicle to a trailer or hauler with EASY TO INSTALL/EASY TO ACCESS Tie Down Brackets. Designed to bolt onto your CalTracs Mounts and LEAVE ON without affecting performance. Can be used in different configurations, depending on your needs.
NOTE: Does not include straps.TD-45 Shown mounted on graphic(0 reviews) -
Lifestyle
2XL Grey T-Shirt (T-2XG)
NEW! 2X-LARGE CHARCOAL GREY T-SHIRT
50/50 Cotton/Poly blend for comfort and ease of wear. Silk screened front and back. Machine washable.
Available in sizes M, L, XL, 2XL, 3XL
(T-LG shown)
(0 reviews) -
Lifestyle
L Grey T-Shirt (T-LG)
NEW! LARGE CHARCOAL GREY T-SHIRT
50/50 Cotton/Poly blend for comfort and ease of wear. Silk screened front and back. Machine washable.
Available in sizes M, L, XL, 2XL, 3XL
(T-LG shown)
(0 reviews) -
Accessories
SPRING SHACKLES/set (SHU-300×500)
Calvert Racing Shackle and Bushing set for 62-65 Fairlane.
Universal Shackles for vehicle with Calvert Split Mono Leafsprings with 1/2″ bolt and 1″ OD (outer diameter) bushings top and bottom, 3-1/2″ center to center.
This kit includes 1 pair of shackles and a total of 8 polyurethane bushings, 4 for the rear of the spring and 4 for the upper frame above the shackle. These shackles feature a 9/16″ shouldered bolt that necks down to a 3/8″ thread, with the required nuts included.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-73B)
2015-2020 Ford F150
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye, 1 grease packet.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews) -
Leafsprings
Split Mono Leafsprings/pair (372-34)
2004-2014 Chevrolet Colorado
2004-2014 GMC Canyon
PRICE PER PAIR, SPLIT MONO LEAFSPRINGS, STOCK RIDE HEIGHT
Tested on the fastest stock suspension cars in the world, Calvert’s Split Mono Leafsprings are designed to control and reduce excessive body separation in rear suspension and plants the rear tires without unloading.
All of Calvert Racing’s Split Mono Leafsprings are assembled to order with grade 8 hardware and heavy-duty alignment clamps. Aluminum bushings are pressed into the front spring eyes and polyurethane bushings in the rear spring eyes, these springs have been proven to withstand over 2,500 HP at ¼ mile ETs in the 6s.
NOTE: Calvert Racing Springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Spring halves are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Split Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.
(0 reviews) -
Accessories
2.5 ” Axle Perch/pair (HDP-250)
SPRING PERCHES FOR 2.5″ AXLE TUBE
Set of (2) Two Perches. Fully enclosed for added strength, pedestal tabs ensure heat penetration when welded to housing. Perch extends to center line of axle tube for more surface area. Precision laser cut. Requires welding to axle, see graphic for info.
Check out the comparison graphic to see how Calvert’s patented Heavy Duty Perches compare to other manufacturer’s stock perches.
Patented HD Axle Perches. Universal design fits nearly every application. Available to fit the most common axle tube diameters; 2.25″, 2.5″, 2.75″, 3″, 3.25″ and 3.5″
WELDING ONTO AXLE: Pinion angle recommendation is -2 to -4 degrees when used with CalTracs. NOTE: This is the angle of the pinion in relation to the angle of the output shaft of the transmission, NOT the driveshaft. Add the angle of the pinion yoke to the angle of the output shaft with the vehicle sitting at rest with weight on the tires.
(0 reviews) -
Accessories
ALUMINUM BUSHING/SET (BK-64)
1964-1973 Ford Mustang
Kit includes two aluminum bushings and 2 steel inserts for FACTORY leafspring front spring eye, 1 grease packet.
If you need replacement bushing for Calvert Springs, please call us directly.
(BK-34 shown)
(0 reviews)
