Shop
Showing 424–432 of 622 resultsSorted by popularity
-
CalTracs Pivot PlatesCalTracs MX ADJUSTABLE Pivot Plates/set of 4 (PLX-0414-275)
NEW! SET OF FOUR MX ADJUSTABLE PIVOT PLATES, FOUR HOLES, standard spring eye, INCLUDES HARDWARE. Designed to replace your current CalTracs Pivot Plates.
Engineered to provide MAXIMUM ADJUSTABILITY for drag race cars and small trucks. Only 1/2″ longer than our standard drag profile, these plates were designed with smaller holes set closer together which allows closer to parallel baseline adjustments without sacrificing ground clearance or strength.
- CHEVROLET NOVA 1968-1978
- CHEVROLET CAMARO/FIREBIRD 1967-1981
INCLUDES: Four plates, plus two sets of bolts and sleeves to easily modify your current CalTracs.
Made with 5/16″ Mild Steel, black powder coated for added durability.
IMPORTANT: INCLUDE YEAR, MAKE AND MODEL IN THE CUSTOMER NOTES SECTION SO WE MAY VERIFY THE CORRECT COMPONENTS ARE SENT.
NOTE: It is recommended that you begin using the hole that allows the traction bars to be most parallel to the ground when your vehicle is fully loaded, weight on tires. Adjust according to how your vehicle responds and your desired level of hook.
(0 reviews) -
Lifestyle
2 COOLING CLOTHS (LS-Cool2)
NEW! TWO Cooling Neck Cloths
No waiting to cool down. Just dunk these 12×34″ cloths in water, snap, and wrap around your neck or head for instant cooling that lasts and lasts. Once they start to dry, dip ’em in water and snap, and you’re set for another few hours. These are VERY popular with the Calvert Racing crew in our warehouse/manufacturing facility!
Royal blue with white Calvert Racing logo. 50/50 Poly/Nylon blend, 12×32″
(NOTE: The color runs VERY SLIGHTLY on first use, barely noticeable if you are wearing white. The color comes out in the regular wash.)
(0 reviews) -
Accessories
ALUMINUM BUSHING/EACH (B-250-100-250)
ALUMINUM BUSHING ONLY (does not include inner sleeve)
SOLD INDIVIDUALLY
(0 reviews) -
CalTracs - Trucks
CalTracs Truck (7610-325)
1968-1972 Ford F-100 2WD with 3.25 inch diameter axle tube
Designed especially for trucks, axle BELOW springs. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, eliminates spring wrap up, improves 60′ times. Black powder coated. Berlin-style pivot plates for most applications.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your truck hooking harder than ever whether you’re drag racing, sled pulling or just towing. Helps eliminate wheel hop. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. HD Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
This kit requires and INCLUDES a set of square u-bolts.
SQUARE U-BOLTS (spring OVER axle): Calvert Racing’s square u-bolts are 9/16″ ” diameter. We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FAQ page or CalTracs Installation Guide for more info.
FULL COLOR INSTALLATION GUIDE INCLUDED.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. If your axle tube measures 3.00 inches diameter, please see part #7610-300
(0 reviews) -
CalTracs - Trucks
CalTracs Truck (7600-325)
1962-1967 F-100 2WD with 3.25 inch diameter axle tube
Designed especially for trucks, axle BELOW springs. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, eliminates spring wrap up, improves 60′ times. Black powder coated. Berlin-style pivot plates for most applications.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your truck hooking harder than ever whether you’re drag racing, sled pulling or just towing. Helps eliminate wheel hop. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. HD Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
This kit requires and INCLUDES a set of square u-bolts.
SQUARE U-BOLTS (spring OVER axle): Calvert Racing’s square u-bolts are 9/16″ ” diameter. We recommend torqueing truck/square u-bolts to 90-100 foot lbs. After running the vehicle down the track a few times, we also recommending checking the u-bolts and readjusting if necessary. Please see FAQ page or CalTracs Installation Guide for more info.
FULL COLOR INSTALLATION GUIDE INCLUDED.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. If your axle tube measures 3.00 inches diameter, please see part #7600-300
(0 reviews) -
Accessories
STRUT ROD KIT/pair with Mounts (SR-63)
Built for 1962-1965 Ford Fairlane. Includes Mounts.
Sold as a pair.(SR-63 shown)
(0 reviews) -
Lifestyle
XL BLACK Zippered Hoodie Sweatshirt (ZH-XB)
XL ZIPPERED HOODIE – BLACK
Medium weight hoodie with full length zipper and front pockets. 80% Cotton/20% Polyester for fit and comfort. Silk screened front and back. Machine washable, cold with like colors.
Available in limited quantities in L, XL, 2XL, 3XL, 4XL only. PLEASE NOTE: These hoodies run a bit narrow and long.
(ZH-XB shown)
(0 reviews) -
CalTracs - Standard
CalTracs Standard (6430)
THIS KIT INCLUDES 2-HOLE PIVOT PLATES.
Built for:
1964-1973 Ford Mustang (with REVERSE EYE springs – see graphic)
Rod Ends/Heim Joints NOW COME WITH GREASE ZERKS. Add a small amount of grease to reduce chatter.
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.FULL COLOR INSTALLATION GUIDE INCLUDED.
(0 reviews) -
CalTracs Links
CalTracs Force transfer Links/pair- 25″ (L225-250-285)
SET OF TWO
1.25″ diameter x 25″ force transfer links. Measure end to end. Can be lengthened 3/4″ each end by turning once installed.
Made with 4130 Chromoly, the CalTracs preload link is light weight but strong, ensuring maximum leverage and minimum flex. Gloss black powder coated for added durability.
(0 reviews)
